International Countries ▾
Spirit of the Engine 25% of the world's generated energy is lost due to friction...


Products Metabond products Metal surface treatments

Metabond TRUCK

/kepek/galeria_c/20121127090959_metabond_truck_178x178.jpg Illustration only

Product Datasheet - Metabond TRUCK
Safety Datasheet - Metabond TRUCK

Metabond TRUCK is a state-of-the-art ash-free metal surface treatment using nanotechnology for the engines of commercial vehicles. It has an excellent antifriction and extraordinary lubrication effect. It is recommended for the engines of new, part new and used commercial vehicles even equipped with particulate filters, added to the motor oil of the required quality.

The primary effect of METABOND is the chemical metal surface treatment, which creates ideal conditions for the oil film, thus reducing engine wear and decreasing maintenance costs. As a result of nano-size polyceramic added to today's most advanced ash-free metal surface treatment and the special lubrication enhancing components, the Metabond TRUCK significantly increases the lifetime of the engines and reduces friction loss by 60%.


Metal surface treatment and nanoceramics also reduce leakage problems. This significantly reduces emissions and greatly reduces potential oil consumption. Due to nanotechnology, Metabond TRUCK can be used for both mainstream and secondary, super fine filters.


Metabond TRUCK offers ideal conditions for lubricating oils even at extreme loads. This facilitates the engine's internal operation and the movement of components, which results in a significant increase in engine performance and/or fuel saving.


By using it, the noise level is noticeably reduced immediately. When used continuously in new equipment it guarantees a triple service life. The use of Metabond TRUCK eliminates cold starting difficulties and provides a protective effect even in the event of a short-term partial oil shortage or complete loss of oil pressure.


The lubricants of the Metabond-treated equipments maintain their lubricity for a longer period of time due to the more ideal operating conditions, thus increasing the oil change interval, thus reducing the environmental load.



Field of application:

It can only be used in new, part-new and used engines of commercial vehicles, buses, agricultural machines, mining machines and earthwork machines, as it contains specific components for the engine oil of commercial vehicles.

It can be mixed with all synthetic and mineral based commercial vehicle engine oil.



Simply put the bottle on a warm radiator or in warm water in order to warm up the content of the bottle to a pourable consistency, shake well and pour 1 bottle (1 litre) into the engine (25 to 35 litres oil fill) to the new, warm engine oil and then run the engine for a few minutes. In case of a smaller or bigger engine, the mixing ratio is 5%. The treatment has to be repeated at each oil change cycle. Its use assumes the use of the required grade of engine oil!


Shelf-life: Unlimitied if not opened. 2 years after opening.


Made in EU


Packaging: 1 litre, 5 litres



This site use cookies to improve the user experience and make our service better. More information